AEC: How to activate a relay output using Advanced I/O

Solution

Create an One Shot Advance I/O event to trigger the relay output desired. See below step by step how to do it.

 

Create a “Criteria” specifying the event we want to use to activate the relay output

 

• Go to “Configuration” and then “Criteria”

 

Figure 1.

 

• Click the “green plus” to create a new Criteria

 

Figure 2.

 

• Under description assign a name
• In this example, the user only wants one door to trigger one relay, Click “Selected Devices Only”, select the desired door and add it to the “Selected Devices” column

 

Figure 3.

 

• Click the “Events” tab

 

• The user only wants the relay triggered by one specific event: “Door held open”. Click “Selected Events Only”. Add the desired event to the “List of Selected Events” column

 

Figure 4.

 

• If this action is desired to happen only in one specific schedule, click the “Time” tab and choose the desired schedule.
• Click Save

 

Figure 5.

 

Create an Advanced IO to assign the Criteria for activating the relay output

 

• Go to “Configuration”, and click “Advanced IO”

 

Figure 6.

 

 

• Click the “green plus” to create a new one

 

Figure 7.

 

• Under description assign a name for the new Advanced I/O
• The function needed is “One Shot”
• Select the output duration desired
• The “Input Control” is the criteria previously created. Click the edit button, select “Criteria” and the name assigned to the Criteria
• The “Output Link” is the relay output we want to activate. Click the edit button and select the relay output desired.
• Click the save button

 

Figure 8.