APE Configure Door shunt only

Applicable in scenarios when a manual egress is used instead of the automatic Door Opener.

An input will shunt the door contact so an unauthorized access (e.g. Door Forced Open) event is not going to be generated and output ¨door opener¨ is not going to be triggered.

This Input can be configured with a request to exit motion or a pushbutton.

Open APE configurator, go to entrances, select ¨Local Open Enable¨ as your shunt only input. 

Event under Logviewer will be displayed as message 66 Start Remote access from ext. switch. At this point door can be opened manually.