Skip to main content

How to configure Access via PIN code alone AMS 3.0

  • Step 1: Create your door model and select ¨wiegand reader, keyboard¨

step 1.PNG

 

  • In case that the door was created previously without keyboard, it can be modified under the reader settings select type and select WIE1K reader

 step 2.PNG

  • Step 2: Under options enable ¨access also by PIN code alone¨

step 2b.PNG

 

  • Step3: Go to configuration, Options, PIN codes and select the desired PIN code length

step 3.PNG

 

 

 

  • Step 4: Go to Card reader and create type Dialog PIN card, two options available ¨Generate PIN¨ (I will generate a random PIN code) or ¨enter PIN¨ (user can enter customized PIN code)

step 4.PNG

 

 

  • Step 5: Go to card definition and enable Input mode

step 5.PNG

 

  • Step 6: Go to Personnel data, select Cards, select the right arrow under ¨record card¨ and select ¨Dialog  PIN card¨, enter the PIN code. 

step 6.PNGstep 6a.PNGstep 6b.PNG

 

Notes: 

  1. Visitors are not allowed to use identification PIN codes only verification PIN Code.
  2. Make sure door is assigned to an authorization.
  3. Operation, to access via PIN code: Enter your PIN code followed by #


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close