Skip to main content

How to set up First Card Unlock on the Access Easy Controller V2.1 (AEC)?

How do you configure First Card Unlock on the Access Easy Controller V2 so the door schedule does not unlock the door until someone has entered the building?


Step-by-step guide

  1. Log into the AEC with Administrator priviledges
  2. Browse to Configuration | Device | Door and select the correct door.
  3. Under Scheduling Options, click on the box next to Only After Valid Access Condition.
    The system now only unlocks the door after a valid access card is presented during the scheduled time period.



JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.