Skip to main content

How To: Testing the RF line card with the C601 without using a radio

 First, disconnect the radio receiver from the DB9 connector on the back of the RF terminator card. Then take a C601 Encoder without the transmitter and wire it to the DB9 connector as follows:

DB9 to C601

Green to terminal 6 (12VDC)

Blue to terminal 7 (ground)

Black to terminal 2 (data)

The C601 Encoder LED lights solid for 20 seconds, then the transmitter begins transmitting. You should be able to see and hear the signals at the receiver


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.