How to access programming in the EZ Series Via Phone Session

Issue

What are the steps to start and end the phone session programming?

Solution

1. House Phone: Press the # key three times, and enter the passcode when prompted. Default ( 5432 )

2. Outside Phone: Dial the house phone number, and press * key three times when the call is answered, Enter a passcode when prompted

3. Installers Quick Connect: Connect a phone set to the control panel's test post. Press and hold the test button for approximately 15 seconds. Enter a passcode when prompted.

Note: To end the phone session, Press the # key repeatedly until the system says "goodbye".