- In a system with multiple areas assigned to one keypad, and there is a need to either arm or disarm all areas independantly, the disarm command must be added to the function list.
- When attempting to disarm an area from a keypad that is assigned to an associated area, the area rearms when using a passcode. How should I disarm the area?
- In the function list, assign a 1 (Disarm) to menu item #1 and turn this feature on for the appropriate CC address.
- When disarming an area from a keypad that is assigned to an associated area, press the Escape key and press Enter at Disarm.
- Enter a valid passcode that has authority over the area to be disarmed.
- The keypad shows the area to be disarmed. If this is the correct area, press Enter. If not, press the Next key until the desired area is shown.
