How to Correct the panel sending point restorals but not sending alarms.

Setting Alarm Abort to yes in point index programming would prevent non-fire, visible point alarms from sending Alarm signals if an alarm silence is performed prior to the end of the Abort Window. Abort Window is set in GV2Aux>Misc>Abort Window. Alarm Abort is defaulted to yes in all point indexes with the exception of 3, 4, 5 and 22. The Abort Window can be set between 15-45 seconds in 1 second intervals, and is defaulted to 30 seconds.

 Alarms must be enabled in Routing>Burglar Reports to enable Burg Alarms to send via the selected Route Group.