Skip to main content

How to enable the Ground Fault display and trouble tone on the D6412/D4412.

Using Keypad Programming:
  • Using keypad programming modify the current setting in Nibble 1265 to include = Enable Ground Fault Display & Trouble Tone . See figure 1 below.

Ground fault display and trouble tone.png

Using Remote Programming Software:
  • In the miscellaneous sections of the panel program: Set the Enable Ground Fault Display & Trouble Tone =Yes.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close