Skip to main content

How to Enter a Passcode in a D636A Keypad

Overview: User is entering passcode twice to arm alarm system. A five second delay between key strokes will cause the keypad to view the next entry as the start of a NEW passcode. Key strokes must be strung together with no pauses in between longer that 5 seconds.

Issue

User must enter passcode twice to arm the system.  Same code is used for both entries.
 
Solution
 
The user is pausing too long between key strokes.  After a key is pressed the next key stroke must be pressed wthin 5 seconds. A delay of 5 or more seconds will cause the keypad to view the next key stroke as the start of a new entry.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.