How to make Custom Text display after replacing the keypad.

This solution is to resolve the issue where previously programmed custom text does not display after replacing an LCD keypad.

To replace an LCD keypad set at address 1 that has custom text:

1. Obtain a copy of the panel program, using a D5200
2. Attach the new keypad to the panel
3. Send the copied program back to the panel

•  If LED keypads and LCD keypads are on the same system, the LCD keypad must be at address 1 for this change to take into effect.

D2212, D2412, D2812,Custom Text, D223,D222, Remote Programming Software, D5200