How to program a transmitter into the EN4204/R Echo Stream Receiver.

Steps to program a receiver into the EN4204R Echo Stream stand-alone receiver.

1. Open the receiver housing.
2. Connect the power cabling.
3. Set the frequency band.
4. Press the Advance button to select the first transmitter point to program
5. Press the Program button to begin programming the point.
6. Use the Advance button to choose a supervision window; press Program to complete and advance to the output option.
7. Use the Advance button to select the output number; press Program to complete and advance to the output type option.
8. Use the Advance button to select the output type. If programming the EN4204 press Program to complete and advance to the switch type option; if programming the EN4204R, press Program to complete and skip to step 10.
9. Use the Advance button to choose between normally open and normally closed; press Program to complete programming.
10. If you wish to register a transmitter to the point you’ve just programmed, press the transmitter’s Reset button; otherwise, press Program to save programming changes without registering a transmitter.
11. Press Advance to choose the next transmitter point to program.