Skip to main content

How To: Program communications into the D8112G2

 Copy program from 8112G2.
Go to AUX
In AUX Go to LOGGER

Change the following from No to YES:

      • 6.2 SendAlm
      • 6.3 SendTbl
      • 6.4 SendRes

      Note: If Open and Close reports are required
      then the following should also be YES:

          • 6.2 SendO/C


          JavaScript errors detected

          Please note, these errors can depend on your browser setup.

          If this problem persists, please contact our support.

          Contact Support Close