How to Program the D6112 to Report using Modem Format

Issue

Can not get the panel to send modem format. Modem is set to yes in the program, and the CS is set to 7. The panel will send BFSK.

Solution

To report in Modem II format, the following must be set:

Be sure the receiver will accept Modem II format.

Account number can be a 3 or 4 digit for modem. If using a 3 digit, program a zero as the first digit.
Program item 2.3, Modem, must be set to yes.
Program item 3.3, AModem, must be yes if using an alternate phone number as well.
Program item 2.5, Ack14, must be set to no.
Program item 3.5, AAck14 must be no if using an alternate phone number as well.
Program item 2.7, Ack23, must be set to no.
Program item 3.11, AAck23, must be no if using an alternate phone number as well.
When Modem format is selected, the panel will ignore any entries in the CS line of the program.