How To Reset Detectors on D8112 Series CMD 47

Issue

How to reset Smoke Detectors after an alarm.

Overview: A D136 Plug in Relay is required see below.

Solution

Reset Detectors

By using COMMAND 47, you are able to reset faulted detection devices such as smoke detectors, shock sensors or other power resettable devices from your Alpha II Command Center(Note: Ask your alarm technician which detection zones you may reset from the Alpha II by entering COMMAND 47).

NOTE: If you enter COMMAND 47 and the detector resets momentarily, but then returns to a faulted condition, the detector may be faulty or still in an alarm mode. Contact your alarm company and describe the problem in detail.

To use COMMAND 47:

1. Ensure security system is disarmed.

2. Press the COMMAND bar. The display should show "SYSTEM COMMAND".

3. Press and release the 4 key. Now press and release the 7 key. The display shows RESET SENSORS for approximately 10 seconds.

Part numbers D8112, D8112A, D8112E, D8112E1, D8112G, D8112G1, D8112G2