Skip to main content

How to set a test timer or test report for B465 Universal Dual Path Communicator?



Test Reports can be set up from Teraterm or RPS (requires firmware 2.0 or above) 

The test report timer (re)starts when the panel item is changed or when the module reboots, once the timer expires the test report is sent

Step-by-step guide


Teraterm/RPS:

  • Go to System Configuration > Test Report Settings > Test Report Interval
    The timer options are  Off, 4hr, 6hr, 12hr, or 24h


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.