How to setup Resettable Smoke Power on the D4412/D6412 panel

Issue

How do I program the output on a D4412/D6412 panel for resetting the power on a 4 wire smoke detector?

Solution

When using 4 wire smoke detectors on a D4412/D6412 panel, use output function type FIRE VERIFICATION ( 1,13 ). This will give you a 15 second activation when CMD 47 is entered at the command center. This can be used with output PO1. If using Po2, Po 3, or Po 4 outputs a D133 or D134 Relay will be needed.