Skip to main content

How to: Supervise the B8512 or B9512 keypads even when disabled

If the keypad Type is set to an SDI type keypad (see below) the supervision setting can be configured YES or NO.  When the keypad Type is set to one of the SDI2 type keypads the supervision Yes/No setting is ignored and the keypad is supervised.  

SDI2 devices are always supervised by design regardless of the supervision setting. 

SDI Keypads SDI2 Keypads
 D1255 VFD Keypad (SDI) B915
 D125xRB Keypad (SDI) B920
 D126x LCD Keypad (SDI) B921C
  B925F
  B926F
  B930
  B942

Notes

  • SDI2 devices that are the same type of device must use different addresses.
  • SDI2 devices that are not the same type can be configured to the same address. 

For example:

  • The B915, B92x, B930 or B942 are all same device types (keypads) and must use different addresses.
  • The B920, B208 and B520 are all different device types and can all use the same address.


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.