How to Use Auto Pre-Alert D4412/D6412 when Sked Arming

Issue

When using the Auto Arm Sked, the keypad shows a countdown timer counting down 30 minutes prior to arming.

Solution

Auto On Pre-Alert Time
Nibble: 0233
Default: 6 (30 minutes)
Selections: 0-15 (time = selection x 5 minutes; 0 = disabled)
Parameter Description
The pre-alert sounds before the Auto On Sked to warn users to exit or extend (Cmd 51) the auto arming.

At the Auto On time, the panel starts exit delay. See Sked Type for a complete description of the Auto On Skeds.

If the area is armed according to the scheduled arming state (All On or Part On) during Auto On Pre-Alert Time and then disarmed before the scheduled arming, auto-arming will not occur.