What does the Remote Reset command communicate using Modem IIIa2 format when connected to RPS via a network connection?
7000/9000 and G-Series Control Panels
The 7000/9000 and G-Series Control Panels send a Reboot event up to version 7.0 when using the Reset Panel command when disconnecting with RPS from the network. Automation sometimes reads the command as a local reset instead of a remote reset (i.e., using a reset pin instead of an RPS reboot). The event codes are:
SIA Event Code 'RR'
6500 Event Code 'D14'
GV2-Series Control Panels
GV2-Series Control Panels send a Remote Reset event. This event is the correct event for a panel remotely reset via RPS. The event codes are:
SIA Event Code 'RN'
6500 Event Code 'D11'
