Skip to main content

How to use the RF3341 Keypad on a D4412/D6412 Panel.

  • Note: The instructions printed on the back of the RF3341 is specific to the DS7400 series and does not pertain to D6412/D4412 panel types.
    The following commands used with the RF3341 keypad using the RF3224 receiver on the D6412/D4412 panel are as follows:
    •  PIN + #1 will arm ALL ON
    •  PIN + #2 will arm PART ON
    •  PIN + #3 will arm PART 2 ON
    •  PIN + # will disarm the system
    • A, B, and C keys will operate per panel programming with a single press and hold till beep on the RF3341.
    •  All other functions do not apply to the D6412/D4412 panel using the RF3224 receiver.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close