Skip to main content

How to View and clear Alarm Memory in the D6412 & D4412.

Command 40 is used to view alarm memory .
  1. Ensure the area is disarmed.
  2. Press Cmd + 4 + 0 and enter a valid passcode.
  3. The keypad displays the points in the alarm memory.
  4. To exit this menu, press Cmd or wait several seconds for it to time out.
  5. Arm and Disarm the area to clear alarm memory.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close