Skip to main content

How to View the Event Log using the 540 command center with Honeywell 5800/5900 Series Panels.

  1. Enter a valid passcode and press ENTER.
  2. Press NEXT until VIEW LOG?  displays. 
  3. Press ENTER, the display will then show the current date and time.
  4. Press ENTER again to start from todays date and then PREVIOUS to scroll back through the events.
  5. When finished, press CLEAR and the command center returns to idle text.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close