Which device is required for testing Bosch Glassbreak detectors?

Question

Answer

DS1101i_1102i_1108i_Installation_Manual_enUS_9007201891205643.pdf RADION_receiver_SD_R_Operation_Manual_enUS_10907999883.pdf

Glassbreak detectors are designed to listen for specific sounds from breaking glass. The device used for testing must generate the proper sounds for the glassbreak to generate an alarm. If the correct tester is not used, an alarm will not be generated.

When testing the DS1101i/1102i/1108i Glass Breakage Detectors:
- Use the DS1110i Glass Breakage Tester.
- See section 4 of the DS1101i/1102i/1108i Glass Breakage Detectors Installation Manual for testing instructions.
When testing the Radion RFGB-A glassbreak:
- Use the Sentrol 5709C hand-held tester.
- See section 5.2, pg28 of the Radion B810 Receiver Reference Guide for testing instructions.