Do I need to know the camera credentials to use the IVA Configuration plug-in?

Question

Answer

With version 2.0 of the Bosch Plug-in Suite there's the possibility to configure the Bosch camera IVA from inside Genetec's Config Tool. This operation is natively supported by Genetec with the following versions:

SC 5.12.1 → native support for cameras connected via the 'Hybrid Driver' (CPP 13 and newer)
SC 5.12.2 → native support for cameras connected via the 'Hybrid Driver' and the 'Legacy Driver' (CPP 7.3 and older)
SC 5.11 and 5.10 are supported with the plug-in but require to enter the camera credentials for the configuration

The availability of this function is linked to the base license. Any base license that was issued after June/2024 has the property attached. For upgrading older licenses please reach out to your Genetec representative.