Skip to main content

Which are the Load-balancing parameters for DIVAR IP and DSA E-series?

Question

Which are the Load-balancing parameters for DIVAR IP and DSA E-series?

Answer

Load balancing is provided with respect to the bandwidth and the number of iSCSI connections and is configurable per IP address (iSCSI target).

For example:

  • Load-balancing parameters are optimized for the DIVAR IP 5000 default configuration (JBOD). When running DIVAR IP 5000 in RAID 1 mode, load-balancing parameters may need adaptation in BVMS.
  • Navigate in the device tree of BVMS Configuration Client to VRM devices > Local VRM > [Context Menu of the storage expansion] > Load Balancing
ModelRAID 4* / RAID 5RAID DP* / RAID 6JBODRAID 1
Soft LimitsHard LimitsSoft LimitsHard LimitsSoft LimitsHard LimitsSoft LimitsHard Limits
iSCSI sessionsData Rate (Mbps)iSCSI sessionsData Rate (Mbps)iSCSI sessionsData Rate (Mbps)iSCSI sessionsData Rate (Mbps)iSCSI sessionsData Rate (Mbps)iSCSI sessionsData Rate (Mbps)iSCSI sessionsData Rate (Mbps)iSCSI sessionsData Rate (Mbps)
InforTrend48160602004816060200****************
FAS 2020*9920012425099200124250****************
FAS 2040*201320252400201320252400****************
FAS 2050*9924012430099240124300****************
FAS 31xx*406640508800406640508800****************
S550*9924012430099240124300****************
DLA1200****************5212065150********
DLA1400102160128200************************
DSA E-series (1GbE)320400400500320320400400****************
DSA E-series Dual Port (1GbE)240400300500240320300400****************
DSA E-series (1GbE) + Expansion320400400500320480400600****************
DSA E-series Dual Port (1GbE) + Expansion240640300800240480300600****************
DSA E-series (10GbE)320400400500320320400400****************
DSA E-series Dual Port (10GbE)240400300500240320300400****************
DSA E-series (10GbE) + Expansion320640400800320480400600****************
DSA E-series Dual Port (10GbE) + Expansion240640300800240480300600****************
Others48160602004816060200****************
Divar IP 2000********************16100****1670
Divar IP 3000********************32120****3284
Divar IP 5000 (1xHDD)********************32130****n/an/a
Divar IP 5000 (2xHDD)********************32220****3290
Divar IP 5000 (4xHDD)********************32310****32200
Divar IP 6000 1U****128200************************
Divar IP 6000 2U****128200************************
Divar IP 6000-R2 2U****128550****128475****************
Divar IP 6000-R2 3U****128550****128475****************
Divar IP 7000 1U********************64150********
Divar IP 7000 2U****128200************************
Divar IP 7000-R2 2U/ 3U****128475 ****128475****************
Divar IP all-in-one 7000-R2 2U/ 3U****256550****256550****************
Divar IP all-in-one 7000-R3 2U/3U****256550****256550****************
Divar IP all-in-one-7000-R4 2U/3U****256550****256550****************
Divar IP all-in-one 4000 ********************64250****64250
Divar IP all-in-one 6000 ****128400****128400****************
Divar IP 5000 AIO********************42170****42170
 









  

* It will result in a performance loss of 20%

***Soft limits is an estimation of 20% base on hard limit value

** Note: Soft Limit not requires since 3.00.x


Nice to know:

For a better understanding of the use of our Bosch products, we encourage you to join our online Trainings from Bosch Building Technologies Academy

When completing the Training Plan you will be able to register for a Expert Level classroom Training offered in different countries across the globe!

From our online trainings you can find out:

  • How to license a system that runs in full BVMS mode
  • How to check the health of the system

✔️System recovery

✔️Replace a hard drive

✔️Setup SNMP traps in BVMS

✔️VRM monitor

✔️Upgrade using Software Center

  • And many other useful information


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.