Which are the RCP commands to disable or enable IVA on Bosch cameras?

Question

Which are the RCP commands to disable/ enable IVA on Bosch cameras?

Answer

First recommendation would be to configure the mode for IVA as a trigger, setting IVA as Profile 1 for “trigger off” and IVA as silent for “trigger on”.

Then use the following CGI commands to switch the virtual trigger input on/off:

// Virtual input off

• http://192.168.0.105/rcp.xml?command=0x0a8b&type=F_FLAG&direction=WRITE&num=1&payload=0

//Virtual input on

• http://192.168.0.105/rcp.xml?command=0x0a8b&type=F_FLAG&direction=WRITE&num=1&payload=1