Skip to main content

Main

Main

Access Accessories
Access AMC
Access Easy Controller
Access Readers
Access Software
Can another door model be added to a controller after an elevator reader is created?
Can I change the AMC2 strike relay in AMS?
Can I connect 2 IP AMC controllers together via RS485?
Can I downgrade my AEC firmware to 2.1.8.5?
Can I upgrade AEC firmware directly from 2.1.8. or 2.1.9x to the latest version?
Can I use the extra relays on AEC reader boards as auxiliary relays?
Access Professional conversion to AMS videos
How to add a reader extension board to Access Management System (AMS)?
How to add an Alert Unit to the Security Escort software
How to add Maps to Security Escort?
How to change a VRM server connected to a BVMS system?
How to check if your PC is AMS ready?
How to configure RPS API to work over HTTPS?
How to enable card or pin in Access Professional?
How to program Man-Trap AMS 5.01 software?
How to set up First Card Unlock on the Access Easy Controller V2.1 (AEC)?
How to setup pincodes to work in AMS 4.0?
How to trigger an AMC relay to fire on an access granted event?
How-to: ReadykeyPro Password Restrictionsin version prior to 6.4
How to enable ReadykeyPro Elevator Control-Without Floor Tracking
How-to: RdkyPro 1320 Aux Output Relay Configuration
How to setup Manual Card Entry Setup for ReadkeyPro
How to troubleshoot a Badge Number of (-1) Indicating in RdkyPro
How-To: D6100 failover solution
How to troubleshoot AEC 2.1 time drift and syncronization
How to Assign Cards if the dialog box does not open in Personal Management.
How To access the AEC2.1 from a computer if the Lantronix device is on the same subnet
How to troubleshoot the Access Easy Controller (AEC) Version 2, if it will not display cardholders.
How to generate an AEC duress alarm event.
How to Assign the "Exit Door" function to a Criteria in AEC 2.1
How to add additional Access Easy Controller reader boards on the RS-485 loop
How to generate an Audit Log Report in Readykey PRO
How To: Find the part number for the SC2104 wiring harness
How to enable more than one badge per cardholder in Readykey Pro
How to integrate a D6686 on a D6600 or D6100 with Readykey Pro
How To: Define the dialer errors on the Safecom dialer
How To: Determine Safecom trouble for RF remote
How To: Prevent the C601 from going into constant reset
How To: Connect the C460 to a C601 Fastlink
How To: Check phone line voltage on the C601 with supervision enabled
How To: Prevent the C601 from going into constant reset with the C8137 interface
How To: Determine the definition of uplink/downlink
How To: What is the phone line voltage for the C601
How To: DS7060 give Perimeter Homeguard
How To: SafeCom SC4000 Pid 0169 Radio Communicator Lock up
How To: Part number for the internal battery for the IT1500
How To: Removal of the SC2104 internal battery
How To: Manually initialize the SC3100 radio
How To: Manually initialize the SC2104
How To: Determine how long the C472 stays keyed befor it stops transmitting
How To: Select a transmitter for the Multilink system
How to supervise the C8137 zone outputs
How To: Standing Wave Ratio relay configuration on the C472
How To: Maximum deviation on the C472 Transmitter
How To: What is the input and output impedence for the C471R receiver
How To: Connecting the C460 to the C601 fastlink encoder
How To: Configure the output supervision on the C8137
How To: Determine the Fastlink system ID
How To: Testing the RF line card with the C601 without using a radio
How To: Using the C472TP transmitter ona non-private tone system
How To: Test antenna and transmitter on a fast link radio system
How-to: AEC Common Alarm Output
How to troubleshoot cardholder badges set to lost or returned in ReadyKeyPro
How to troubleshoot Getting a "Failed to Report Expected Event" in ReadyKeyPro Alarm Monitoring
How to connect and initially configure an LNL-2220 via the web page
How to determine the maximum number of simultaneous Rdkypro users
How to determine the part number for the SC3100ME wiring harness
How to determine the part number for the SC2104E wiring harness
How to supervise the points on the SC2104
How to operate the SC3100 without and internal battery
How to determine the output voltages of the C601 encoder
How to check the audio level on the C472 transmitter with the C601 encoder
How to determine the impedence for the C472 transmitter and the C471R receiver
How to troubleshoot Transactions Not Displaying in AEC View Activity
How-to: Readykey Pro LpsSearchSvc Service
How to determine what a Safecom dialer error #7 is.
How to determine what a Safecom Dialer error #6 is.
How to determine what a Safecom dialer error #5 is.
Hot to determine a Safecom Dialer error #4
How to determine a dialer error # 3 at the central station
How to determine a Safecom dialer error #2
How to determine what a Safecom dialer error # 1 is
How to convert the ST1000 software to work with the
How to do a one for one swap on the Safecom Radio in the field
How to determine the part number for the L-bracket for the whip antenna
How to determine what UL applications can be used on the C801 and C802
How to define a triple (3) flash on the SC4000 battery status indicator
How to define a double flash on the SC4000 battery LED indicator.
How to trouble shoot an off normal test and a SYS FLT:F
How to find the EOL value for the SC2104
How to define a red system status light on the field radio.
How to retrieve hardware ID for Building Integration System (BIS) and check the Software Maintenance Agreement (SMA) status?
How to integrate the B or G intrusion panels in AMS?
How to enable Access Management System (AMS) log files for engineering and technical support analysis?
How to retrieve system fingerprint for Access Management System (AMS) and check the Software Maintenance Agreement (SMA) status + SMA extension?
How to enable Access Management System (AMS) log files for engineering & technical support analysis?
AMS: How to open a door based on a schedule
APE Configure Door shunt only
Install Security Escort on Windows Server 2012
How to set up interlock APE
How to add a printer to APE.
How to filter the panel history in RAM/RPS
How to identify problems with the 7000/9000 series panel connecting with the DX4020 and the DX4010i
How to connect to a panel with the DX4020 or the D9133TTL-E for use with RPS
How to troubleshoot Readykey Pro Invalid Badge, Format, or Facility Code
How-to: Readykey Pro Invalid Badge, Format, or Facility Code
How to troubleshoot LNL-2220 reader ports appear offline in Alarm Monitoring, with a yellow X
How to troubleshoot a green and white icon for the controller in Alarm Monitoring?
How to configure Reader Voltages for rdkypro LNL-1320
How to configure Readykey Pro Holidays
How to configure elevator Day Mode settings in ReadyKeyPro
How to delete events from the Access Professional Edition Log Viewer?
How-to: (AEC) and (AEMC) network ports.
How-to: Access Easy Controller (AEC) Time and Attendance
How-to: Using BOSCH 37-bit cards on an AEC
How to setup Keypad-Only Operation in the Access Easy Controller (AEC) 1.0
How to troubleshoot "Card number exceeded limit" in AEC1 or 2.1
How to Download an AEMC or Allplex Remote Controller
How-to: Compatible Credentials for the Lectus series Readers
How-to: What IP Address does the AEC 2.1 use to search for local video (CCTV) devices?
How to troubleshoot a Communication Initialization Failed in Readykey Pro
How-to: Readykey Pro default SQL password.
How to Troubleshoot an Ethlan-Micro and RKP-500
How to Delete All Alarms in ReadyKey Pro
How to change the Number of Events Visible on the AEC1.0 or 2.1 Activity Screen
How to troubleshoot "You are a Stranger" Message in AEC 1.0
How-to: AEC1.0 Panel not Booting Properly. LED's 1, 3, 5, and 7 Constantly Lit
How to configure Elevator Control with AEC1.0 Controller
How-to: Security Escort Trouble Banner
How to Assign Maps in the Security Escort Software to a Receiver or Area
How to troubleshoot Security Escort Receiver LEDs Not Working
How-to: Access Granted Causes Communication Loss to Rdkypro Reader
How to troubleshoot "System Data Disk is Full" error
How to troubleshoot Transponder Communication Failure a Using Serial Cable
How to troubleshoot only Readers 1-4 Working on the AEC1.0 System.
How to default the IP Address of an AEC1.0
How-to: Straight Through or Crossover Cable to Connect an AEC Panel Directly from a Computer
How to troubleshoot the Expiration Date in Readkypro Not Operating
How-to: Recommended Cable Layout for 485 to 485 Devices for Rdkypro
How to troubleshoot EA102 Receiver Jamming
How to troubleshoot Rdkypro Not Logging Offline Events
How to Change the D8229 Access Keypad Default Site Code
How to setup a D8229 in ReadkeyPro
How to define the led operation on the SC3100 and the SC2104
How to trouble shoot the SC9000 computer RF trouble
How to manually initialize the SC3100 and the SC2104
How to manually initialize the SC4000 Safecom radio
How to know what UL listings the SC4000 has
How to make the proper Safecom antenna selection.
How to properly place an antenna for a Safecom radio
How to determine what causes a Safecom general dialer error.
How to get the SC4000 to dial on the primary phone line
How to get the SC4000 to dial central station
How to eliminate the dialer error #1 at the central station
How to elminate the static and the noise from the radio repeater
How to select a surge protector for the RF and the AC power
How to extinguish a constant busy light on the SC820
Ho to verify the UL power requirements for the SC820
How to set the maximum modulation diaviation on the SC820
How to wire the SC820 to be within specifications
How to set the maximum power on the SC820
How to determine the maximum power output of the RF2000 transmitter
How to program the C801 and the C802, will any phone handset work?
How to: Encoding Badges using Barcodes in Readykey Pro
How to: Using the iClass reader ARD-RK40
How to: Closing Remote SQL Connections in Readykey Pro
How to: View Activity Page Displays Incorrectly on Access Easy Controller
How to: C900 VOLTAGE LOW message
How to configure the keypad reader RK-40 with pin code
How to reset an AMC2 to factory settings
How to toggle an AMC relay by double-clicking on a floor plan symbol
How to troubleshoot a BIS License empty - FIPS
How to use the Tamper of an AMC in BIS
How to troubleshoot Global I/O's not Working in Readykey Pro
How to find the Security Escort History Event Log Storage Location
How to troubleshoot a Distorted Display in Sys Admin and the Cardholder Screen
How-to: ReadykeyPRO Default Accounts and Passwords
How to troubleshoot an Invalid Card Format message in Access Software
How to Enable the Comm Server Icon in the windows Taskbar
How-to: Max SE485 Wire Length per Transponder
How-to: LNL-1320 Aux Input Supervision
How-to: Integration of Active Directory With ReadyKeyPRO Cardholders
How to troubleshoot a Security Escort Receiver Sounder not Working
How-to: Security Escort SE485 Recommended Cable Specs
How to: Error Installing SQL Server 2005 Express SP3
How to: Effects of Upstream Communication Loss
How to troubleshoot High Communications Error Count in escort
How to add Acknowledgement Notes to rdkypro
How to Add a Transmitter/Subscriber to Security Escort
How to enable Timed Anti-passback for Rdkypro
How-to: Default Security Escort Login
How-to: Security Escort Outdoor Receiver Spacing
How to troubleshoot RDKYPRO Pin Codes but the Codes Don’t Work
How-to: Eight-bit Word Format Pin Readers and ReadyKey PRO
How to Backup an AEC1.0 or Allplex Database to a PC
How to troubleshoot Serial Number Out of Range Error in Rdkypro
How to configure Access via PIN code alone AMS 3.0
How-to: How Escort Positions the Transmitter Signals on the Map
How to configure Dual factor Authentication (Card + PIN) AMS 3.0
How to Add Sounds to Alarms in ReadykeyPro
How to troubleshoot Unstable Communication with System Hardware in rdkypro
How-to: Error “Create fail for window copyright" in Security Escort
How-to: Upgrade Part Number for Security Escort Software
How to set up Dual Factor Authentication (Card + Pin) APE
How to migrate functional APE server to a new machine.
How to define AED in RPS diagnostics
How to troubleshoot Alarm Monitoring displaying event, "Panel Free Memory Low."
How-to: Using the iClass reader ARD-RK40
How-to: Encoding Badges using Barcodes in Readykey Pro
How-to: Using Elevator Control on a 4 Reader Board in Access PE
How-to: Archiving/Purging using Scheduler in Readykey Pro
How-to: RDKYPRO E-mail messages sent automatically have no information in the body of the e-mail.
How to troubleshoot an Offline rdkypro Reader
How-to: Access Professional Video Verification Disable
How to troubleshoot Software Connection Errors in rdkypro
How to enable built in Features of SE2-304 Transmitter
How to troubleshoot a Login Driver Error after a RDKYPRO Database Restore
How to address the onboard readers on an RKP-2220?
How-to: Access Transactions Not Sent to AEC1.0 Activity Screen when Credential Presented
How-to: Why does (AEC) version 2 say, "Door already in use" when trying to delete a reader board?
How to troubleshoot Controller Encryption Error in Readykey Pro
How-to: Security Escort - Requiring a Check In - Setup
How to determine which of the wires are used for the RS-232 connection PC to the transponder
How-to: What is the default path to the Access Professional Edition Video Player?
How to troubleshoot Invalid Login Error When Using Access Easy v 1.0
How-to: AEC Spare Relays
How to Adjust the Access Easy Controller 2.1 for holiday schedule door control.
How to Display Latest Alarms First in rdkypro
How to troubleshoot unable to Learn In a Security Escort Transmitter
How to set the AC fail time in seconds instead of minutes
How to Upgrade a Readykey Pro Access Panel.
How to troubleshoot Facility Code Exceeds Limit in AEC
How-to: Door Contacts and Request to Exits are not Responding on Correct AEC 1.0 Address
How-to: AEC 2.1 Reader Compatibility - ARD-AYCE658
How-to: What port needs to be open in a firewall for the AMCIPConfig utility?
How to enter 26-bit card format into the (AEC1.0) programming?
How to Change the Door Model Assignment in AEC 2.1
How to troubleshoot AEC Custom Logo Error: 4032 - Invalid File Name
How to troubleshoot AEC 2.1 Playback Video Error
How-to: Why does the AEC display, "Permission Denied"
How to configure Door shunt only with Access Professional Edition
How to troubleshoot Security Escort Bad Checksum Error
How-to: What does a low tone, high tone, then a 1 second pause mean on the (AEC) version 2?
How to troubleshoot ReadyKey PRO user fields cover the buttons
How-to: AMC Mux Device
How-to: What does "No Video Verification Active" mean in the Access Professional Edition Logviewer?
How-to: Effects of RdkyPro Upstream Communication Loss
How to troubleshoot Device Type Mismatch message in Readykey Pro
APE Message No. 542 Spam
How-to: Maximum Number of Concurrent Users For This Feature Has Been Reached in rdkypro
How to address ReadyKeyPro devices connected to the LNL-8000
AMS: How to create a Time model (schedule)
AEC: How to activate a relay output using Advanced I/O
What are the part numbers for the Security Escort licenses?
What does a low tone, high tone, then a 1 second pause mean on the AEC v2?
What is the AMC power supply consumption?
What is the compatibility of the ARD-AYCE658 Reader with AEC 2.1?
What is the part number for a Security Escort USB dongle?
What Readers are supported with AMS?
Which network ports do the AEC and AEMC use to communicate on the network?
Why does AECv2 say, "Door already in use" when trying to delete a reader board?
Why does Security Escort only show one transponder after upgrading from 2.18 to 3.xx?
AEC 2.1: Gmail Account Configuration
Access Management System (AMS) - Visitor Management shows: Access Denied
AEC 2.1 Gmail Account Configuration
BIS 4.9 and older: COM security changes for Microsoft operating systems
Getting a connection error when accessing the AEC webpage
Getting an "ini-file" error when using the AMS or APE migration tool
Possible solution for AEMC HTTP 500 error
Possible solution to AMS identity server error after installing visitor management
Unable to synchronize an intrusion panel in AMS
Getting a login failed error in AMS Map View version 5
Unable to run the AMS AECT utility
Getting an application error when trying to save an AMS file in License Manager

Breadcrumbs

Home
Access Control

Access Readers

Access Readers Articles:

Title	Labels
What Readers are supported with AMS?	bt_faq access_readers acs kb-article

Pagination

Previous Page

Access Easy Controller
Next Page

Access Software

Terms & Conditions
Legal Notice
Data Protection Notice
Corporate Information
LinkedIn

Copyright © KEENFINITY 2026
Powered by Scroll Sites & Atlassian Confluence