The following procedure to convert the ST1000 software to the D6200 format:
-
Using the SC9000 computer, place a blank disk in the 3.5 inch drive.
-
Copy the database file from the SC9000 computer to the disk.
-
Place the disk in the 3.5 inch drive that contains the D6200 software.
-
Log onto the computer and launch the D6200 software.
-
Click the Safecom header in the toolbar to open the drop-down menu.
-
Select Database tool >> Convertdatabase.
-
When completed, remove the disk and store it in a safe place for future use.
-
Connect to the D6690 using the red connect button on the tool bar.
-
Select the drop-down menu again, then click Safecom database management >> Download to the D6690
-
When the download has completed, select the Safecom tab >> Safecom channel management >> Upload from the D6690
-
NOTE: The safecom does not work above D6200 software verion above 1.35