Issue
How do you setup ReadykeyPro to enable sounds on specific events?
Solution
1.Log into "Sys Admin" and click on "Monitoring" and select "Alarms".
-
Click on the "Audio" tab.
-
Click the "add" button and select "browse".
-
In the look in box, click on the drop down arrow and navigate to where your "wav" files are kept.
-
Select the wav file you want to use and click on the open button.
-
In the name type in a name for your sound.
-
Select the "notification" radio button and click "okay".
-
Next click on the "Alarm Configuration" tab.
-
Select an alarm event in the list of events window. "Make sure checkmark is on the event."
-
Next click "Modify". Under the "Audio Notification" select the wav file desired for the event.
-
Check repeating if you want the sound to repeat until acknowledged. Also select the frequency of the repeating alarm in seconds.
-
Click on the okay button and log out of Sys Admin and Alarm Monitoring and log back in.