Add or Change a user's passcode or authority level:
-
1. Enter the [master code] + [# 0].
-
2. Enter the user number of the user to add or change followed by the function digit, new user code and #. For example: UU/F/CCC/#, where UU=User Number, F=Function Code (see below) and CCC=User Code. Enter: [0 2 0 2 2 2 #] = User: 2, Authority Level: 0, Code: 222.
Function Digit (Authority level):
-
0 = Arm only, with bypass privileges.
-
1= Arm and disarm, with bypass privileges. (The master code, user code 1, requires a function of 1).
-
2= Temporary code; arm only, with bypass privileges.
-
3= Temporary code; arm and disarm with bypass privileges.
-
4= Arm only, without bypass privileges.
-
5= Arm and disarm, without bypass privileges.
-
6= Temporary code; arm only without bypass privileges.
-
7= Temporary code; arm and disarm without bypass privileges.
-
8= Read back users code in this slot.
-
9= Access control code. Operates access control output.