The A, B, C keys must be pressed two times to activate.
-
Verify correct programming under A, B, C Key programming.
-
- Ensure correct setting of Alarm Output: No Output, Steady, or Pulse as needed.
-
- Enter the Key Text, which should display upon activation
-
- Select Ack Tone Yes/No for the acknowledgement tone upon activation
-
- In the Report Code parameter, enter the code for the panel to report upon key activation.
* In Modem Format the panel reports; Alarm Report Point [xx]
* In Pulse format, the first digit you enter here sets the report group. The second digit sets the point number.