A supervised device has been added to the control panel program, such as a keypad, network device or printer interface. The panel is not able to see this device on the SDI bus, the device number will indicate what kind of device and its addres.
-
Need to check the wireing to the SDI device
-
Check the DIP switch addressing of each SDI device
-
SDI 1 - 8 = Keypads
-
SDI 17 - 19 = Printer Modules
-
SDI 33 - 40 = D9210B
-
SDI 80 - 88 = B426, DX4020 or D9133TTLE