-
Version1 or 2 Panel types only allow Zone Test to be used from a keypad assigned to the partition where the point is assigned.
-
When attempting to perform Zone Test on DS7400 version 1 or 2 panels by pressing Pin + #81 the keypads return the message 'Error Please Try again'. Attempting to perform Zone Test while in single partition mode results in the same error.
-
DS7400 Version 3 and 4 panels do allow Zone Test to be used from a Master keypad provided Single Partition mode is selected.
For further information of the DS7400 operation see the below documents.
-
22232G Reference guide for DS7400 ver1 panels pg.35
-
28995B Reference guide for DS7400 ver2 panels pg.35