When the D1265 display is not centered causing some of the buttons to become outside the viewing area, calibrating the keypad may correct the problem.
Steps to calibrate the D1265:
-
Power down the D1265 by removing the keypad from the mounting plate.
-
Reconnect the keypad back in place.
-
Press an hold the screen as the D1265 powers up until the beeping stops and release your finger.
-
On the menu that displays, select Calibrate.
-
Press the ( + ) in each corner on the screen.
-
Press SAVE and EXIT.
-
Power down the D1265 by removing the keypad from the mounting plate.
-
Reconnect the keypad back in place.
-
When the keypad comes back up, the display should be centered.