-
Note: The instructions printed on the back of the RF3341 is specific to the DS7400 series and does not pertain to D6412/D4412 panel types.
The following commands used with the RF3341 keypad using the RF3224 receiver on the D6412/D4412 panel are as follows: PIN + #1 will arm ALL ON PIN + #2 will arm PART ON PIN + #3 will arm PART 2 ON PIN + # will disarm the system A, B, and C keys will operate per panel programming with a single press and hold till beep on the RF3341. All other functions do not apply to the D6412/D4412 panel using the RF3224 receiver.