When troubleshooting the DX4020-G it can be very helpful to have a copy of the log file.
The following steps will describe how to capture and save the log from the DX4020-G
1. place a jumper across the config mode pins and connect a usb mini cable between the pc and the usb mini port on the its-dx4020-g. 2. go to device manager and look under ports (comm & lpt) for the its-dx4020-g. note: the picture below displays the com6 as the selected comm port however this may be different for each computer configuration.3. open tera-term, select the serial radio button and select the comm port for the dx4020-g as determined with device manager in step 2. 2. enter the log in password for the dx4020-g (default= 4020g) 3. press [3 + enter] to start the log. the log begins to run and will stop when any key is pressed. let the log run for about 10 minutes.4. from the tera-term drop-down menus select edit and select screen. 5. open a text editor such as note-pad and paste the saved log. 6. select file and save-as to save the log file.