How to change the passcode on the DS7090

Use the following steps:

Enter the master user code [#][0].

1. Enter the user number you want to add. For example, press [0][2] for User 2.

2. Enter the authority level (see below).

3. Enter the new user code #.             

Authority levels (Function code digit):

• 0 = service code, all privileges

• 1 = master code, pass code changes, arm, disarm, force arming,bypassing, and system test.

• 2 = Arm, disarm, force arming, bypassing, and system test.

• 3 = Arm, disarm, force arming, and bypassing.

• 4 = Arm, disarm.

• 5 = Temporary code arm, disarm.

• 6 = Arming only, force arming and bypassing

• 7 = Arming only.

• 8 = Temporary code arming only.

• 9 = Access code.