Issue
Special Alert COMMAND 7.
Solution
Special Alert COMMAND 7
This Alpha II command is a manually operated and initiated alarm command. COMMAND 7 can be programmed to respond to a choice of numerous situations that may need immediate attention. This command may also be used to send a silent alarm to the Central Station without sounding an alarm signal on the premises. Check with your alarm company for the options they offer.
To use COMMAND 7:
-
Press the COMMAND bar. The display should show SYSTEM COMMAND.
-
Press the 7 key. The display indicates which zone COMMAND 7 is programmed to report to the Central Station. If programmed as an invisible alarm, the display does not change from what was previously shown.
Part numbers D8112, D8112E, D8112E1, D8112G, D8112G1, D8112G2