Question
Can Supervision be disabled on the IP Communicator module on a GV4 Series control panel?
Answer
No, supervision is enabled on the IP Communicator module in GV4 Series control panels by default and cannot be disabled.
-
When connected to SDI2 and addressed as 1 or 2, removing the B420 will cause the message Network Module 1 Missing (or Network Module 2 Missing) to display.
-
When connected to SDI and addressed to 4 (SDI88) or 5 (SDI92), removing the B420 will cause the message SDI88 (or 92) Missing to display.