How to configure a point to be used only as a Watch Point.

Definition:

• Watch Mode Only- This point will not create alarm or trouble responses and will not generate reports to the Central Monitoring Station. 

Program the Point:
Select Point Type= 0.
Select all Yes/No options= NO.
Set Alarm Report Routing = 0: No Reports, No Events to Log/Printer.
Set Restoral Report Routing = 0: No Reports, No Events to Log/Printer.

Select Watch Tone and enable Watch Point:
Select [Cmd] + 62 to select the watch tone.
Select [Cmd] + 63 to select the watch point(s).