To do a monthly timer test a SKED and a HOLIDAY INDEX will need to be created.
To create a holiday index in RPS:
-
Go to SCHEDULES and then holiday indexes.
-
Select "set schedule" for one of the holiday indexes (1-4).
-
Go through each month and select the day that the test signal is to be sent. This day will repeat every year.
To create a holiday index in the D5200:
-
Go to RADXSKED and enter group. (Be sure to receive a copy of the program before making any changes).
-
Go to holiday indexes and enter group.
-
Go to add/change/delete and enter group.
-
At "date" enter the first month and day the test is to occur.
-
Select which holiday index (1-4) this date will be used in.
-
Repeat for each date that is to be used.
To create a test timer schedule in RPS:
-
Go to SCHEDULES and then skeds.
-
Select an unused sked (1-40) and enter a 9 for the function code.
-
Select no both deferred and hourly.
-
Enter the time that the test signal is to be sent.
-
Leave the date "disabled".
-
Leave all days set to no.
-
Set "except on holidays" to yes.
-
Select the holiday index that was created and set it to yes.
To create a test timer schedule in the D5200:
-
Go to RADXSKED and enter group. (Be sure to receive a copy of the program before making any changes).
-
Go to SKEDS and enter group.
-
Select an unused sked (1-40) and enter a 9 for the function code.
-
Select no both deferred and hourly and then exit group.
-
Enter the time that the test signal is to be sent.
-
Leave the date "disabled".
-
Leave all days set to no.
-
Set "except on holidays" to yes.
-
Select the holiday index that was created and set it to yes.