On which occasion does DIVAR recorder send the SNMP trap HDD_STATUS_CHANGE?

Question

On which occasion does DIVAR recorder send the SNMP trap HDD_STATUS_CHANGE?

Answer

One of the possible traps  that DIVAR IP hybrid/network can send is HDD_STATUS_CHANGE.

The HDD_STATUS_CHANGE is triggered when the status of the Hard Disk changes. 

The HDD can have the status:

• OK

• BAD

• ERROR

• MISSING.

So HDD_STATUS_CHANGE gets triggered when the Hard Disk stops working or when it gets physically removed.

NOTE: List and details for the SNMP traps that a DIVAR hybrid/network can send out on event can be found in the MIB file of the device.

Nice to know:

• What should you know about SNMP and Bosch cameras SNMP support?

• How to activate the SNMP and configure sending SNMP traps from Bosch cameras?