What does the object outline mean in the video display (BVMS, Config. Manager, camera's Live page)?

Question

Display	Description
	Object that generates an alarm event under the current settings appear on the camera image inside a red outline.
	An object that has triggered one alarm event but does not generate another appears inside a pink outline (example: object has crossed a line).
	Object that is detected as moving but do not generate an alarm event under the current settings appear inside an orange outline.

Display

Description

Object that generates an alarm event under the current settings appear on the camera image inside a red outline.

An object that has triggered one alarm event but does not generate another appears inside a pink outline (example: object has crossed a line).

Object that is detected as moving but do not generate an alarm event under the current settings appear inside an orange outline.

The above information is applicable when using the following software application.

Bosch Video Management System (BVMS) version 10.0.1 and above.
Bosch Configuration Manager version 7.0 and above.
Live page on the web browser for IP camera operating on firmware version 7.70.0126 and above.