| MIC IP Starlight 7100i locks on non-relevant targets when using Auto-Tracking (Global VCA - Object on field) |
| How to connect an analog control system directly to MIC IP serial port? |
| Why does the preset tour on a MIC camera not resume after an Intelligent Tracking event? |
| How to improve the image performance on your AUTODOME 7100i camera? |
| Why does the AUTODOME IP starlight 5100i complete startup movement but not allow PTZ control afterward when powered by a PoE++ injector? |
| What RCP command can be used to run the self-test (BIST) for the CPP13 camera to find it's lower tilt limit? |
| AUTODOME IP 5100i: Fix pixelation and blurring image |
| Is the NPD-6001B midspan compatible with the AUTODOME IP starlight 5100i IR camera? |
| How can I test the Tilt Range of the MIC inteox 7100i camera? |
| How to configure 2 horizontal positions (Azimuth limits) and enable Auto Pan on a (PTZ) Moving camera like for example a MIC or Autodome? |
| What should I do if the Autodome IP starlight 7000i camera has condensation inside? |
| How can I schedule Intelligent Tracking on the MIC IP starlight 7100i camera? |
| Why is the AUTODOME Inteox 7000i showing black screen in the live view on the Operator Client after upgrading BVMS to v12.1? |
| Why cannot I see the ‘Auto High Temperature’ option of White Balance mode of MIC IP Starlight 7100i camera? |
| Does AUTODOME IP 5000i – CPP 7.3 camera (Firmware 7.89.0045) work in BVMS 8.0? |
| No focus & iris controls: MIC IP starlight 7000i integrated as ONVIF in 3rd party software |
| What is the recommended AC cable for NPD-9501-E Midspan 95W 1 port outdoor? |
| Electrical programming of the power supply with washer pump of MIC IP starlight 7100i |
| How to set focus position on MIC IP starlight 7100i camera (focus to a certain setpoint)? |
| How to prevent the snow and ice buildup on the PAN mechanism of AUTODOME IP 5100i Cameras? |
| Improve the image quality of AUTODOME inteox 7000i & comparison with AUTODOME 5000i IR camera image |
| How to upgrade the Autodome IP 5000 IR (CPP4) camera firmware from 6.32 to the latest available? |
| Why does the Tamper Detection sometimes work and sometimes not (AUTODOME IP starlight 5000i IR)? |
| What is the voltage tolerance of AUTODOME IP starlight 7000i? |
| What does mean the ‘Status 11’ displayed on Bosch MIC camera? |
| Does the Autodome starlight 5100i IR camera work with a PoE switch or Bosch midspan? |
| Where is the physical reset button of Bosch INTEOX cameras? |
| How can you avoid the MIC Inteox, Ultra & Starlight 7100i camera wipers getting stuck? |
| What to do when MIC IP starlight or ultra 7100i camera is unable to perform the Object Classification? |
| What is the Bosch MIC IP cameras: Wiper or Washer RCP command syntax to implement in 3rd party software? |
| Is there a default password for INTEOX cameras? |
| MIC IP Starlight 7000i cameras – Common questions and answers about Firmware |
| Is 100Mbps SFP module supported in a setup with fiber connectivity between AUTODOME 7100i and Wall arm & PSU? |
| MIC inteox 7100i camera: drifted image on the predefined preset with impact on the VCA tasks |
| Fix black screen and 'Display blanked' message in Live view of AUTODOME camera |
| How to disable the digital zoom of AUTODOME IP starlight 5100i IR camera? |
| How to configure MIC IP 7000 HD with VIDEOJET decoder 3000 for integration with analog CCTV systems? |
| How to activate the wiper and the white lights of MIC IP starlight 7000 HD in BVMS? |
| Is it possible for camera image to remain in different visual fields for different length of time? |
| What does ‘status 1’ mean when using MIC 7100i starlight 1080p and Ultra 4K camera? |
| What does the Status 4 or Status 6 message mean for MIC IP FUSION 9000i? |
| What does 'status 9' mean on the MIC IP ultra 7100i │ MIC IP starlight 7100i camera's web page ? |
| AUTODOME inteox 7000i - Overheating |
| MIC IP ultra 7100i (CPP 7.3 ) –Front end not available after FW upgrade from 7.62.0005 to 7.70.0126 |
| Fix Privacy Mask issue on a MIC IP starlight 7000 HD camera (FW 6.40.0240) |
| Fix Pan and Tilt behavior of an AUTODOME or MIC IP PTZ camera |
| How does the 'zoom threshold' function work for Bosch cameras in Configuration Manager? |
| Is it possible to track airplanes on a runway using a MIC-7522-Z30B camera? |
| MIC-7000i & MIC-9000i Optical- Troubleshooting for Video Quality & Focus Issues |
| MIC IP ultra 7100i showing ‘Low PoE’ and ‘Low PoE & Low 24VAC’ messages during login |
| PTZ control does not work when using the KDB-UXF keyboard with the AUTODOME 7100i camera via Videojet |
| Which are the features of Bosch INTEOX CPP13 cameras? |
| Can Bosch PTZ camera move to a specific pre-position during inactivity? |
| Can Bosch camera move with specific speed to a certain PAN & Tilt Position Coordinate (RCP command)? |
| Is PoE power enough for the AUTODOME IP starlight 7000i camera mounted with a VG4-A-PA0 Pendant arm? |
| Can the MIC inteox 7100i (MIC-7602-Z30B) be powered using an Axis T8154 PoE injector? |
| How to receive warning messages in Genetec Security Center from a MIC IP starlight 7100i camera? |
| What to do when the MIC IP starlight 7100i cameras pan but do not tilt? |
| Can I keep the pre-positions of a faulty MIC inteox 7100i camera to be imported to another same model camera? |
| Can I connect MIC IP 7000i to an analog CCTV system using Virtual Port for PTZ control through 3rd party decoder? |
| AUTODOME & MIC cameras – Privacy mask moves when zooming IN & OUT |
| MIC IP starlight 7100i - focus issue (basics checks) |
| Freeze Frame does not work when moving TO or FROM a Preposition scene with privacy mask enabled |
| How to stop 'rtp.p_type 97' (OSD or Video Authentication packet) on a CPP4 and CPP7.3 |
| AUTODOME IP starlight 7000 HD & Genetec: Troubleshoot frozen image & no PTZ |
| MIC IP 7000i & 9000i Bosch camera - Camera Block Firmware Upgrade for Firmware 7.60.0118 and higher |
| MIC 7000: Changing orientation is not possible because of the mounted illuminators |
| MIC7100 - read the Onvif MinIris and MaxIris values |
| How to enable the checkbox 'Show VCA items' on the Bosch IP camera Web GUI? |
| How to disable VCA metadata& trajectories on MIC IP starlight 7000i camera on the web browser video? |
| How to disable compass character on the PTZ camera screen (OSD)? |
| How to proceed when the MIC IP starlight 7100i camera wiper stops on the screen? - physically reset- |
| How to solve the speed zoom for AUTODOME IP starlight 7000i? |
| How to configure the Bosch ITS and NTCIP licensed versions of IP moving cameras to respond to NTCIP? |
| What could be the cause of AUX commands not working on MIC camera in BVMS Operator Client? |
| Can the zoom of AUTODOME 4000i & 5100i be configured in PTZ AbsoluteMove Mode (ONVIF related)? |
| Why does the MIC IP starlight 7100i display green tint in the image (mercury vapor lighting)? |
| What should be the specs for the output waveform of the inverter to work with Bosch MIC IP cameras? |
| Is there an adapter to connect MIC IP starlight 7100i to 5G devices with SDI output? |
| FAQ: CGI commands to enable or disable the wiper of MIC 7100i, 7000i, fusion 9000i |
| Is it possible to set the camera interface of MIC IP fusion 9000i to Traditional Chinese language? |
| AUTODOME 7100i enters into color mode after a power cycle during night mode |
| PTZ Bosch camera - Video Optimization (Bright Light Focus) |
| What is the best practice when Auto tracking moving objects with PTZ cameras? |
| How can I factory default the AUTODOME IP starlight 7000i using the reset button (hard reset)? |
| Why are IVA packages (Perimeter & ProBuilding) grayed out in Config Manager after camera firmware upgrade? |
| How to configure a MIC IP Starlight 7000 camera to operate at 25fps? |
| Why the ‘SD card Status’ is missing in GUI of MIC IP starlight, ultra or inteox 7100i camera? |
